Wood Brace 68T3 6x4

Wood Brace 68T3 6x4 offers a straight diagonal profile in a 6x4 timber format. Its wider thickness and shallower second section dimension distinguish it from 68T2; select the projection and height separately from the timber format.

The actual timber section is 5 1/2" x 3 1/2". Choose from 14 projection × height combinations on this page; those dimensions describe horizontal and vertical reach, not diagonal brace length. This model has a 5 1/2" brace thickness. Choose the Smooth or Rough Sawn surface option shown on this page.

Made from Western Red Cedar, this wooden knee brace brings natural timber detail to pergolas, porches, entryways, canopies, and interior post-and-beam accents. Review the model-specific specification sheet before ordering. Suitability for load-bearing use depends on the complete assembly, connections, and installation; product dimensions alone do not establish a load rating.

Materials & Craftsmanship

Wood Brace 68T3 6x4 is crafted in the USA and finished by hand. Natural variations in grain, knots, color, and surface texture are part of real cedar, so each piece has its own character.

• Model-specific shaping and hand-finished surfaces
• Choice of surface texture to coordinate with surrounding timbers
• Dimensions and profile documented for the selected model and size

Care & Finish

Smooth and Rough Sawn describe the wood surface, not a protective coating. Apply a suitable paint or stain for the intended exposure and follow the coating manufacturer’s preparation and maintenance instructions.

• Seal all faces, edges, and cut ends before or during installation.
• Allow for drainage and ventilation, and avoid direct ground contact.
• Inspect the finish periodically and recoat as needed for the exposure.

For additional guidance, see How to Finish Cedar.